Easy Steps To Take To Stop a Constantly Flushing Toilet
Steps to Take for Both an Automatic and Manual Flushometer
Whether it is a toilet overflow or a toilet that will not stop flushing in Jamaica Bay, NY, both can be equally frustrating problems to deal with. Here are the steps to take for both an automatic and manual flushometer to stop a constantly flushing toilet.
1. Shut Off the Flushometer
The first step to resolving the issue for a manual flusher is to shut the flushometer off. There will be a spot where you can use a flat screwdriver on both sides of the flushometer. Using the screwdriver, turn the slot to turn off the water completely; this will help you avoid a toilet flood as you work to fix the problem.
2. Remove the Top
The next step is to remove the top of the toilet. If you are dealing with a manual flushometer, you must use a wrench to unscrew the lid. It is wise to do this as soon as possible to avoid toilet overflow.
3. Clean the Gasket
Remove the flange cover. Once you do that, you will see a gasket loaded with sediment. Take the gasket out and clean it thoroughly, including the weep hole found on the gasket. Follow all the two preceding steps in reverse order now that the gasket is clean, and this should stop a toilet from flushing.
4. Clean the Diaphragm
If you are working with an automatic flushometer, you simply hold down the chrome button until you hear two clicks that are two seconds apart. If you hear the clicks, you need to clean out the diaphragm kit, which is found when you remove the top of the flushometer.
5. Tighten Solenoid
The final step is to tighten the solenoid. Then observe whether there are any missing bowl rings or if any of them are double stacked. If so, you’ll need to replace or remove them.
Follow the steps above to fix an automatic or manual flushometer that won’t stop running. However, if you have experienced a toilet overflow or a flooded bathroom in your property, contact commercial building restoration services as soon as possible.